Setup Mumble on Ubuntu

Mumble is a completely free and open source alternative to other voice suites, such as Teamspeak. It runs on Windows, Linux, OS X, and iOS. This guide will teach you how to set up a Mumble server on Ubuntu.

Basic Installation

This installation will automatically create a user named mumble-server, which will be used to run the Mumble server.

sudo apt-get update
sudo apt-get install mumble-server

Now, we have to set some basic configuration options.

sudo dpkg-reconfigure mumble-server

This will give you some configuration choices:

Select Yes to autostart the Mumble server on server boot.
Select Yes to allow the Mumble server to use a higher priority. This is not essential, but it is generally recommended for optimal performance.
Enter the password for the SuperUser account. This will be used when managing the server from the Mumble client.

Additional Configuration

sudo nano /etc/mumble-server.ini

Here, you can change the more advanced options for the actual server. All other options can be configured from the Mumble client using the SuperUser login that we set up a password for earlier.

Some recommended changes to consider:

Uncomment the autoban-related lines below for some added security.
Uncomment and change the registerName line. This will be the server name displayed on top of the channel hierarchy. By default, it is named Root, but a custom name usually looks better.

Some additional options that you may want to change:

users – If you want to limit or increase the default to 100.
port – If, for some reason, you would rather not run on the default of 64738.
“welcometext” – This message is displayed when someone connects to the server. It accepts basic HTML code.

When you’re done configuring your options, restart the Mumble server:

sudo service mumble-server restart

Open Firewall Ports

If you use UFW, then it’s very easy. If you’re not sure, run the command ufw status. You will see a printout similar to “Status: active” when the UFW is running. In this case, run the command below to open the required firewall port.

sudo ufw allow 64738

Otherwise, it is assumed that you’re using iptables. You can use these commands for iptables:

iptables -A INPUT -p udp --dport 64738 -j ACCEPT
iptables -A INPUT -p udp --sport 64738 -j ACCEPT
iptables -A INPUT -p tcp --dport 64738 -j ACCEPT
iptables -A INPUT -p tcp --sport 64738 -j ACCEPT

That’s all! You will now be able to connect with the SuperUser username and the password you set, and manage your channel using the Mumble client.